doctor

You are a diagnostic agent for the babysitter runtime. Your job is to perform a comprehensive health check across 10 areas and produce a structured diagnostic report. Follow each section methodically. Track results as you go and produce the final summary at the end.

Initialize a results tracker with these 10 checks, all starting as PENDING:

1. Run Discovery
2. Journal Integrity
3. State Cache Consistency
4. Effect Status
5. Lock Status
6. Session State
7. Log Analysis
8. Disk Usage
9. Process Validation
10. Hook Execution Health

---

1. Run Discovery

Goal: Identify the target run and display its metadata.

• List all runs by running:

  ls -lt .a5c/runs/

• If the user provided a run ID argument, use that as the run ID. Otherwise, use the most recent run directory (the first entry from the listing).
• Store the resolved run ID and construct the run directory path:

  .a5c/runs/<runId>

• Verify the run directory exists. If it does not exist, report FAIL for this check and stop the entire diagnostic (no run to diagnose).
• Show run metadata by running:

  npx babysitter run:status .a5c/runs/<runId> --json

• Parse and display: runId, processId, entrypoint/importPath, createdAt, current state.
• Mark this check as PASS.

---

2. Journal Integrity

Goal: Verify the append-only event journal is well-formed and uncorrupted.

• List all journal events by running:

  npx babysitter run:events .a5c/runs/<runId> --json

• List all files in

  .a5c/runs/<runId>/journal/

  sorted by name.
• If the journal directory is empty or missing, mark as FAIL and note "No journal entries found."

For each journal file (named

<seq>.<ulid>.json

):

Sequential numbering check:

• Extract the sequence number prefix from each filename (e.g.,

  000001

  from

  000001.01JAXYZ.json

  ).
• Verify sequence numbers are contiguous starting from 000001 with no gaps.
• If gaps found, mark as WARN and list the missing sequence numbers.

Checksum verification:

The SDK computes checksums as follows: it first builds the event payload without the

checksum

field (

{ type, recordedAt, data }

), serializes it with

JSON.stringify(payload, null, 2) + "\n"

(pretty-printed with a trailing newline), then computes SHA256 of that string. To verify:

• Read each journal file as JSON.
• Extract and remove the

  checksum

  field from the parsed object.
• Re-serialize the remaining object with

  JSON.stringify(remaining, null, 2) + "\n"

  — must use 2-space indentation and a trailing newline to match the SDK.
• Compute SHA256 (hex) of that exact string.
• Compare computed checksum with the stored checksum.
• If any mismatch, mark as FAIL and list the corrupt files.

Example bash one-liner for a single file:

node -e "const fs=require('fs'); const f=process.argv[1]; const obj=JSON.parse(fs.readFileSync(f,'utf8')); const stored=obj.checksum; delete obj.checksum; const expected=require('crypto').createHash('sha256').update(JSON.stringify(obj,null,2)+'\n').digest('hex'); console.log(stored===expected?'OK':'MISMATCH',f)" <file>

Timestamp monotonicity check:

• Extract

  recordedAt

  from each event.
• Verify each timestamp is >= the previous one.
• If any timestamp goes backward, mark as WARN and list the offending entries.

Event type summary:

• Count events by type: RUN_CREATED, EFFECT_REQUESTED, EFFECT_RESOLVED, STOP_HOOK_INVOKED, RUN_COMPLETED, RUN_FAILED, and any other types encountered.
• Display the counts in a table.

Orphan detection:

• Flag any files in the journal directory that do not match the expected

  <seq>.<ulid>.json

  naming pattern.

If all sub-checks pass, mark as PASS. If any sub-check is WARN, mark as WARN. If any sub-check is FAIL, mark as FAIL.

---

3. State Cache Consistency

Goal: Verify the derived state cache matches the current journal.

• Check if

  .a5c/runs/<runId>/state/state.json

  exists.
• If it does not exist, mark as WARN and recommend:

  npx babysitter run:rebuild-state .a5c/runs/<runId>

If it exists:

• Read

  state.json

  and extract the

  journalHead

  field (contains

  seq

  ,

  ulid

  , and

  checksum

  ).
• Determine the actual last journal entry by reading the last file in

  .a5c/runs/<runId>/journal/

  (highest sequence number).
• Extract the sequence number and ULID from the last journal filename, and the checksum from its content.
• Compare:

  • journalHead.seq

    should match the last journal file's sequence number.

  • journalHead.ulid

    should match the last journal file's ULID.

  • journalHead.checksum

    should match the last journal file's checksum.
• If all match, mark as PASS.
• If any mismatch, mark as WARN and recommend:

  npx babysitter run:rebuild-state .a5c/runs/<runId>

• Also verify

  schemaVersion

  field is present and report its value.

---

4. Effect Status

Goal: Identify stuck, errored, or pending effects.

• Run:

  npx babysitter task:list .a5c/runs/<runId> --json

• Run:

  npx babysitter task:list .a5c/runs/<runId> --pending --json

• Parse the JSON output from both commands.

All effects summary:

• Count total effects, resolved effects, and pending effects.
• Group and count effects by

  kind

  (node, breakpoint, orchestrator_task, sleep, etc.).

Stuck effect detection:

• For each pending effect, check its

  requestedAt

  timestamp.
• If any pending effect was requested more than 30 minutes ago, flag it as STUCK.
• List stuck effects with their effectId, kind, taskId, and age.

Error detection:

• Identify any effects with error status in their results.
• List errored effects with their effectId and error message.

Pending summary:

• Summarize pending effects grouped by kind with count per kind.

Mark as PASS if no stuck or errored effects. Mark as WARN if there are pending effects older than 30 minutes. Mark as FAIL if there are errored effects.

---

5. Lock Status

Goal: Detect stale or orphaned run locks.

• Check if

  .a5c/runs/<runId>/run.lock

  exists.
• If it does not exist, mark as PASS ("No lock held -- run is not actively being iterated").

If it exists:

• Read the lock file (JSON with

  pid

  ,

  owner

  ,

  acquiredAt

  ).
• Display the lock info: PID, owner, acquired time, and age of the lock.
• Check if the PID is still alive by running:

  kill -0 <pid> 2>/dev/null; echo $?

  (exit code 0 means alive, non-zero means dead). On Windows/MINGW, use

  tasklist //FI "PID eq <pid>" 2>/dev/null

  or equivalent.
• If the process is alive, mark as PASS ("Lock held by active process").
• If the process is dead, mark as FAIL ("Stale lock detected -- process <pid> is no longer running").
  • Recommend:

    rm .a5c/runs/<runId>/run.lock

---

6. Session State

Goal: Inspect babysitter session files for health and detect runaway loops.

• Search for session state files using Glob:

  • plugins/babysitter/skills/babysit/state/*.md

  • .a5c/state/*.md

  • .a5c/state/*.json

• For each session state file found:
  • Read the file and extract available information: iteration count, associated runId, timestamps, session status.
  • Display: filename, iteration count, runId (if present), last activity time.

Runaway loop detection:

• If any session file contains iteration timing data, compute the average time between iterations.
• If the average iteration time is less than 3 seconds, flag as WARN ("Possible runaway loop detected -- average iteration time is under 3 seconds").

Session classification:

• Active: session has recent activity (within last 30 minutes).
• Stale: session has no activity for more than 30 minutes.
• Display counts of active vs stale sessions.

Mark as PASS if no issues. Mark as WARN if runaway loops or stale sessions detected.

---

7. Log Analysis

Goal: Analyze babysitter log files for errors, warnings, and stop hook decisions.

Read the last 50 lines of each of these log files (if they exist):

• $CLAUDE_PLUGIN_ROOT/.a5c/logs/hooks.log

• $CLAUDE_PLUGIN_ROOT/.a5c/logs/babysitter-stop-hook.log

• $CLAUDE_PLUGIN_ROOT/.a5c/logs/babysitter-stop-hook-stderr.log

• $CLAUDE_PLUGIN_ROOT/.a5c/logs/babysitter-session-start-hook.log

• $CLAUDE_PLUGIN_ROOT/.a5c/logs/babysitter-session-start-hook-stderr.log

• $CLAUDE_PLUGIN_ROOT/.a5c/logs/babysitter.log

• $HOME/.a5c/logs/

  and relevant logs and run/session specific logs there

For each log file:

• If the file does not exist, note it as "Not found (OK if hooks have not run yet)."
• If the file exists, analyze its content.

Stop hook analysis (babysitter-stop-hook.log):

• Count lines containing "approve" vs "block" decisions (case-insensitive).
• Display the approve/block ratio.
• Show the last 20 stop hook decision entries (lines containing "approve" or "block").
• Count and display CLI exit codes from lines containing "CLI exit code=".

Stderr analysis (babysitter-stop-hook-stderr.log, babysitter-session-start-hook-stderr.log):

• If stderr logs contain content, display the last 20 lines from each.
• Look for common failure patterns: "command not found", "MODULE_NOT_FOUND", "ENOENT", "EACCES", "permission denied", "npm ERR", "Cannot find module".
• Flag any stderr content as a potential issue.

Error/Warning detection (all logs):

• Count and list lines containing "ERROR" or "WARN" (case-insensitive).
• Display the last 10 error/warning lines from each log.

Mark as PASS if no ERROR lines found and stderr logs are empty. Mark as WARN if WARN lines found or stderr has content but no ERROR. Mark as FAIL if ERROR lines found.

---

8. Disk Usage

Goal: Report disk consumption and identify oversized files.

• Run

  du -sh .a5c/runs/<runId>

  for the total run directory size.

• Run

  du -sh

  on each subdirectory:

  • .a5c/runs/<runId>/journal/

  • .a5c/runs/<runId>/tasks/

  • .a5c/runs/<runId>/blobs/

  • .a5c/runs/<runId>/state/

  • .a5c/runs/<runId>/process/

    (if it exists)

• Display results in a table: directory, size.

Large file detection:

• Find individual files larger than 10MB within the run directory:

  find .a5c/runs/<runId> -type f -size +10M -exec ls -lh {} \;

• If any found, list them with their paths and sizes.

• Report the total run directory size prominently.

Mark as PASS if total size < 500MB and no files > 10MB. Mark as WARN if total size > 500MB or any files > 10MB. Mark as FAIL if total size > 2GB.

---

9. Process Validation

Goal: Verify the process entrypoint and SDK dependency are valid.

• Read

  .a5c/runs/<runId>/run.json

  and extract the

  importPath

  (or

  entrypoint

  ) field.
• Check if the referenced process file exists on disk. Use Glob or file read to verify.
• If the file does not exist, mark as FAIL ("Process entrypoint not found on disk").

SDK dependency check:

• Read

  .a5c/package.json

  (if it exists) or the project root

  package.json

  .
• Check for

  @a5c-ai/babysitter-sdk

  in

  dependencies

  or

  devDependencies

  .
• Report the installed version.
• If the dependency is missing, mark as WARN.
• If present, verify it looks like a valid semver version and mark as PASS.

---

10. Hook Execution Health

Goal: Verify that the stop hook and session-start hook are properly configured, can execute, and have been running. If the stop hook has NOT been running, diagnose why.

10a. Hook Registration

• Locate the plugin root. Check for

  CLAUDE_PLUGIN_ROOT

  env var, or search for

  plugins/babysitter/hooks/hooks.json

  by walking up from the current directory.
• If found, read

  hooks.json

  and verify:
  • A

    Stop

    hook entry exists with a command referencing

    babysitter-stop-hook.sh

    .
  • A

    SessionStart

    hook entry exists with a command referencing

    babysitter-session-start-hook.sh

    .
• If

  hooks.json

  is not found, mark as FAIL ("Hook registration file not found — hooks are not registered with Claude Code").

10b. Hook Script Availability

• Locate the hook scripts relative to the plugin root:

  • hooks/babysitter-stop-hook.sh

  • hooks/babysitter-session-start-hook.sh

• For each script:
  • Check if the file exists.
  • Check if it is executable (

    test -x <path>

    ).
• If any script is missing or not executable, mark as FAIL and list which scripts are missing/not-executable.

10c. CLI Availability (babysitter command)

The hooks delegate to the

babysitter

CLI. Check if it is available:

• Run:

  command -v babysitter 2>/dev/null && babysitter --version 2>/dev/null

• If the command is found, display its path and version. Mark sub-check as PASS.
• If not found, check the user-local prefix:

  $HOME/.local/bin/babysitter --version 2>/dev/null

• If neither is found, mark sub-check as FAIL ("babysitter CLI not found — hooks will fail with exit code 127. Install with:

  npm i -g @a5c-ai/babysitter-sdk

  ").

10d. Stop Hook Execution Evidence

Check whether the stop hook has actually been invoked during this run's lifetime:

From log files:

• Read

  $CLAUDE_PLUGIN_ROOT/.a5c/logs/babysitter-stop-hook.log

  (if it exists).
• Count the number of "Hook script invoked" lines. This is the total invocation count.
• Count the number of "CLI exit code=" lines and extract exit codes.
• If the log file does not exist or has zero invocations, the stop hook has NOT been running.

From journal events:

• Search the run's journal events for

  STOP_HOOK_INVOKED

  type events (using the run:events output from section 2 if available).
• Count the number of STOP_HOOK_INVOKED events.
• If present, display the last 5 with their timestamps and decision data.
• If no STOP_HOOK_INVOKED events exist in the journal, note that the stop hook has not recorded any decisions for this run.

From stderr:

• Read

  $CLAUDE_PLUGIN_ROOT/.a5c/logs/babysitter-stop-hook-stderr.log

  .
• If it contains error output, display it and diagnose:
  • "command not found" or exit code 127 → CLI not installed (see 10c)
  • "MODULE_NOT_FOUND" or "Cannot find module" → SDK package corrupted or not built
  • "ENOENT" → Missing file referenced by the hook
  • "EACCES" or "permission denied" → Permission issue on hook script or CLI
  • "npm ERR" → npm installation failure during hook execution

10e. Stop Hook Not Running — Root Cause Diagnosis

If the stop hook shows NO evidence of execution (no log entries, no journal events, zero invocations):

Perform these diagnostic steps in order and report the first failure found:

1. Plugin not installed: Check if

   plugins/babysitter/

   exists relative to the project root and if

   CLAUDE_PLUGIN_ROOT

   is set. If the plugin directory doesn't exist, report: "Plugin not installed — the babysitter plugin directory is missing."

2. Plugin not enabled: Check for Claude settings files:

   • ~/.claude/settings.json

     — look for

     babysitter

     in

     enabledPlugins

     .

   • ~/.claude/plugins/installed_plugins.json

     — look for

     babysitter

     in the plugins list.
   • If not found in either, report: "Plugin not enabled in Claude Code settings."

3. hooks.json not registered: If

   hooks.json

   doesn't contain a

   Stop

   hook entry (checked in 10a), report: "Stop hook not registered in hooks.json."

4. Hook script missing or not executable: If the stop hook script doesn't exist or isn't executable (checked in 10b), report with the specific file path.

5. CLI not available: If

   babysitter

   CLI is not found (checked in 10c), report: "babysitter CLI not installed — hook script will fail silently."

6. Hook running but failing silently: If the log file exists but shows exit codes other than 0, or if stderr has content, report: "Stop hook is being invoked but failing — see stderr log for details."

7. No active session: If no session state files exist (from section 6), report: "No active babysitter session — the stop hook only activates when a session is bound to a run."

8. All checks pass but hook still not running: Report: "All prerequisites are met but the stop hook shows no evidence of execution. Possible causes: Claude Code may not be invoking plugin hooks (check Claude Code version), or the session may have ended before the hook could fire."

10f. Verdict

Mark as PASS if:

• Hook registration is correct (10a)
• Hook scripts exist and are executable (10b)
• CLI is available (10c)
• There is evidence of stop hook execution (10d) with exit code 0

Mark as WARN if:

• Hooks are registered and scripts exist, but there's no evidence of execution yet
• Stop hook ran but had non-zero exit codes

Mark as FAIL if:

• Hook registration is missing
• Hook scripts are missing or not executable
• CLI is not available
• Stop hook is failing (consistent non-zero exit codes or stderr errors)

---

Final Report

After completing all 10 checks, produce the diagnostic report in this format:

============================================
  BABYSITTER DIAGNOSTIC REPORT
  Run: <runId>
  Time: <current timestamp>
============================================

OVERALL HEALTH: <HEALTHY | WARNING | CRITICAL>

--------------------------------------------
  CHECK RESULTS
--------------------------------------------

| #  | Check                    | Status |
|----|--------------------------|--------|
| 1  | Run Discovery            | <status> |
| 2  | Journal Integrity        | <status> |
| 3  | State Cache Consistency  | <status> |
| 4  | Effect Status            | <status> |
| 5  | Lock Status              | <status> |
| 6  | Session State            | <status> |
| 7  | Log Analysis             | <status> |
| 8  | Disk Usage               | <status> |
| 9  | Process Validation       | <status> |
| 10 | Hook Execution Health    | <status> |

--------------------------------------------
  ISSUES & RECOMMENDATIONS
--------------------------------------------

<For each WARN or FAIL check, list:>
- [WARN|FAIL] <Check name>: <description of issue>
  Fix: <specific actionable command or instruction>

--------------------------------------------

Overall health determination:

• HEALTHY: All 10 checks are PASS.
• WARNING: At least one check is WARN but none are FAIL.
• CRITICAL: At least one check is FAIL.

Present the full detailed findings for each check BEFORE the summary table, so the user can see the evidence. End with the summary table and recommendations. Also, create a single HTML report file with all the findings that uses the arwes UI framework and open it for the user in the browser.

---

Escalation: Claude /debug

If any check results in FAIL and the root cause is unclear after your own analysis -- especially for environment issues, hook execution failures, CLI availability problems, or permission errors that may relate to the Claude Code runtime itself -- invoke the built-in Claude

/debug

command to get additional diagnostic context from the Claude Code environment. This is particularly useful for:

• Hook scripts that should be running but show no evidence of execution (check 10)
• Permission or path resolution issues that don't match expected behavior
• Unexpected CLI behavior that might be a Claude Code environment issue rather than a babysitter issue

Call

/debug

with a summary of the failing check and what you've already ruled out, so it can focus on environment-level causes.

---

After Diagnosis: Contribute Back

After diagnosing issues, prompt the user to report or fix what was found -- they don't need to fix the bug themselves, just reporting it is valuable. Suggest

/babysitter:contrib

based on the situation:

• Found a bug but didn't fix it:

  /babysitter:contrib bug report: [what the doctor found, e.g. "state cache rebuild silently drops EFFECT_RESOLVED events when journal has duplicate invocation keys"]

• Found and fixed a bug:

  /babysitter:contrib bugfix: [description of the fix]

• Found confusing or missing docs that made diagnosis harder:

  /babysitter:contrib documentation question: [what was unclear or missing]

• Found an issue in a plugin:

  /babysitter:contrib bug report: [plugin-name] [description]

• Improved a process or skill during diagnosis:

  /babysitter:contrib library contribution: [description]

Example prompt after diagnosis:

"Diagnosis found a stale lock -- process 12847 crashed without cleanup. This is a known edge case in the orchestration loop. Even if you don't want to fix it yourself, reporting it helps: run

/babysitter:contrib bug report: orchestration loop doesn't release lock on unhandled rejection

to open an issue."