Saleae Logic MSO Analysis

This skill enables analysis of captured signals from Saleae Logic MSO devices using the

saleae-mso-api

Python library. It supports loading binary exports, analyzing signal transitions, and decoding common protocols.

Prerequisites

• saleae-mso-api

  Python package — Do NOT blindly pip install. First check if it's already installed:

  python3 -c "from saleae.mso_api.binary_files import read_file; print('saleae-mso-api is available')"
  

  Only if that fails, install it:

  pip install saleae-mso-api

• Binary export files from Saleae Logic software (

  .bin

  format)

Quick Reference

Loading Binary Files

from saleae.mso_api.binary_files import read_file
from pathlib import Path

file_path = Path("capture.bin")
saleae_file = read_file(file_path)

# Access metadata
print(f"Version: {saleae_file.version}")
print(f"Type: {saleae_file.type}")

# Access data
contents = saleae_file.contents

Digital Capture Structure

Digital exports contain

DigitalExport_V1

with chunks:

chunk = saleae_file.contents.chunks[0]

# Key attributes:
chunk.initial_state      # Starting logic level (0 or 1)
chunk.transition_times   # numpy array of transition timestamps (seconds)
chunk.sample_rate        # Capture rate in Hz
chunk.begin_time         # Capture start time
chunk.end_time           # Capture end time

Calculating Pulse Durations

import numpy as np

times = np.array(chunk.transition_times)
durations_ms = np.diff(times) * 1000  # Convert to milliseconds

# If initial_state is 0 (LOW):
#   - Even indices (0, 2, 4...) = HIGH pulse durations
#   - Odd indices (1, 3, 5...) = LOW gap durations
# If initial_state is 1 (HIGH):
#   - Even indices = LOW gap durations
#   - Odd indices = HIGH pulse durations

Helper Scripts

This skill includes helper scripts for common analysis tasks:

Protocol Analyzer

# Analyze signal characteristics
python3 skills/logicmso/analyze_protocol.py capture.bin

# Show detailed timing histogram
python3 skills/logicmso/analyze_protocol.py capture.bin --histogram

# Show detected timing clusters
python3 skills/logicmso/analyze_protocol.py capture.bin --clusters

# Export transitions to CSV
python3 skills/logicmso/analyze_protocol.py capture.bin --export transitions.csv

# Show raw transition values
python3 skills/logicmso/analyze_protocol.py capture.bin --raw -n 50

Common Protocol Patterns

UART (Asynchronous Serial)

• Idle state: HIGH
• Start bit: LOW (1 bit period)
• Data bits: 8 bits, LSB first
• Stop bit: HIGH (1-2 bit periods)
• Common baud rates: 9600, 19200, 38400, 57600, 115200
• Bit period calculation:

  1/baud_rate

  seconds
• Identifying features: Consistent bit periods, durations are multiples of base period

SPI (Serial Peripheral Interface)

• 4 signals: SCLK (clock), MOSI (master out), MISO (master in), CS (chip select)
• Clock polarity (CPOL): Idle clock state (0=LOW, 1=HIGH)
• Clock phase (CPHA): Sample edge (0=leading, 1=trailing)
• Data: Sampled on clock edges, typically 8 bits per transaction
• Identifying features: Regular clock signal, CS goes LOW during transaction

I2C (Inter-Integrated Circuit)

• 2 signals: SDA (data), SCL (clock)
• Idle state: Both HIGH (pulled up)
• Start condition: SDA falls while SCL is HIGH
• Stop condition: SDA rises while SCL is HIGH
• Data: 8 bits + ACK/NACK, MSB first
• Address: 7-bit (first byte after START)
• Identifying features: START/STOP conditions, 9 clock pulses per byte (8 data + ACK)

1-Wire

• Single signal: DQ (data/power)
• Idle state: HIGH (pulled up)
• Reset pulse: Master pulls LOW for 480us minimum
• Presence pulse: Slave responds LOW for 60-240us
• Write 0: LOW for 60-120us
• Write 1: LOW for 1-15us, then release
• Read: Master samples 15us after pulling LOW

Analysis Workflow

Step 1: Initial Exploration

from saleae.mso_api.binary_files import read_file
import numpy as np

f = read_file("capture.bin")
chunk = f.contents.chunks[0]

print(f"Sample rate: {chunk.sample_rate/1e6:.1f} MHz")
print(f"Duration: {chunk.end_time - chunk.begin_time:.3f}s")
print(f"Initial state: {'HIGH' if chunk.initial_state else 'LOW'}")
print(f"Transitions: {len(chunk.transition_times)}")

Step 2: Analyze Timing Patterns

times = np.array(chunk.transition_times)
durations_us = np.diff(times) * 1e6  # microseconds

# Separate HIGH and LOW durations
high_idx = 0 if chunk.initial_state == 0 else 1
high_durations = durations_us[high_idx::2]
low_durations = durations_us[(1-high_idx)::2]

print(f"HIGH pulses: min={min(high_durations):.1f}us, max={max(high_durations):.1f}us")
print(f"LOW gaps: min={min(low_durations):.1f}us, max={max(low_durations):.1f}us")

# Find unique timing values (cluster detection)
unique_high = sorted(set(round(d, -1) for d in high_durations))  # Round to 10us
unique_low = sorted(set(round(d, -1) for d in low_durations))
print(f"HIGH clusters: {unique_high}")
print(f"LOW clusters: {unique_low}")

Step 3: Identify Protocol

Based on timing patterns:

• UART: Consistent bit periods, durations are multiples of base period, idles HIGH
• SPI/I2C: us-scale timing, needs clock signal analysis, look for regular patterns
• 1-Wire: Reset pulses ~480us, data pulses 1-120us

Step 4: Decode

Once protocol is identified, decode based on protocol rules. For unknown/custom protocols, analyze the timing clusters and bit patterns to determine encoding scheme.

UART Decoding Example

from saleae.mso_api.binary_files import read_file
import numpy as np

f = read_file("uart_capture.bin")
chunk = f.contents.chunks[0]
times = np.array(chunk.transition_times)

BAUD = 115200
BIT_PERIOD = 1 / BAUD

def decode_uart_byte(start_time, times, bit_period):
    """Decode a single UART byte starting at start_time."""
    byte_val = 0
    for bit_num in range(8):
        # Sample at center of each bit (1.5, 2.5, 3.5... bit periods from start)
        sample_time = start_time + (1.5 + bit_num) * bit_period
        # Find state at sample_time
        idx = np.searchsorted(times, sample_time)
        state = (chunk.initial_state + idx) % 2
        if state:
            byte_val |= (1 << bit_num)  # LSB first
    return byte_val

# Find start bits (falling edges when idle HIGH)
decoded_bytes = []
i = 0
while i < len(times) - 1:
    # Look for falling edge (start bit)
    if chunk.initial_state == 1 or i > 0:
        byte_val = decode_uart_byte(times[i], times, BIT_PERIOD)
        decoded_bytes.append(byte_val)
        # Skip to next potential start bit (after stop bit)
        i += 1
        while i < len(times) and times[i] < times[i-1] + 10 * BIT_PERIOD:
            i += 1
    else:
        i += 1

print("Decoded:", bytes(decoded_bytes))

CTF Tips

1. Unknown protocol: Start with

   analyze_protocol.py --clusters

   to see timing distribution
2. Multiple channels: Export each channel separately, identify clock vs data lines
3. Inverted signals: Some captures have inverted logic levels
4. Timing variations: Real hardware has jitter, use threshold-based detection
5. Partial captures: Check if capture starts mid-transmission
6. Custom protocols: Look for repeating patterns, identify sync/framing bytes

Troubleshooting

"No module named 'saleae.mso_api'"

First verify it's truly missing:

python3 -c "from saleae.mso_api.binary_files import read_file"

Only if the import fails, install it:

pip install saleae-mso-api

Empty or corrupt file

Check file size and try re-exporting from Saleae Logic software.

No transitions detected

• Signal may be constant (stuck high/low)
• Check if correct channel was exported
• Verify trigger settings in original capture

Timing seems wrong

• Check sample rate matches original capture settings
• Verify time units (seconds vs milliseconds vs microseconds)