WireGuard

Overview

Deploy WireGuard — the modern, high-performance VPN protocol built into the Linux kernel. Simpler than OpenVPN, faster than IPsec, with a minimal attack surface (~4,000 lines of code). This skill covers server setup, peer management, split tunneling, site-to-site links, mesh topologies, DNS integration (Pi-hole/AdGuard), automated provisioning with QR codes, and monitoring.

Instructions

Step 1: Installation & Key Generation

# Ubuntu/Debian (kernel 5.6+ has WireGuard built-in)
apt update && apt install -y wireguard wireguard-tools qrencode

# Generate server keys
umask 077
wg genkey | tee /etc/wireguard/server_private.key | wg pubkey > /etc/wireguard/server_public.key

# Generate peer keys (+ optional preshared key for post-quantum resistance)
wg genkey | tee client1_private.key | wg pubkey > client1_public.key
wg genpsk > client1_preshared.key

Step 2: Server Configuration

/etc/wireguard/wg0.conf

:

[Interface]
Address = 10.10.0.1/24
ListenPort = 51820
PrivateKey = SERVER_PRIVATE_KEY
SaveConfig = false

PostUp = iptables -t nat -A POSTROUTING -s 10.10.0.0/24 -o eth0 -j MASQUERADE; iptables -A FORWARD -i wg0 -j ACCEPT; iptables -A FORWARD -o wg0 -j ACCEPT
PostDown = iptables -t nat -D POSTROUTING -s 10.10.0.0/24 -o eth0 -j MASQUERADE; iptables -D FORWARD -i wg0 -j ACCEPT; iptables -D FORWARD -o wg0 -j ACCEPT

[Peer]
PublicKey = ALICE_PUBLIC_KEY
PresharedKey = ALICE_PRESHARED_KEY
AllowedIPs = 10.10.0.2/32

Replace

eth0

with your actual interface and start:

IFACE=$(ip route get 1.1.1.1 | awk '{print $5; exit}')
sed -i "s/eth0/$IFACE/g" /etc/wireguard/wg0.conf

echo "net.ipv4.ip_forward = 1" >> /etc/sysctl.conf && sysctl -p
systemctl enable --now wg-quick@wg0
ufw allow 51820/udp

Step 3: Client/Peer Configuration

Full tunnel (all traffic through VPN):

[Interface]
PrivateKey = CLIENT_PRIVATE_KEY
Address = 10.10.0.2/32
DNS = 1.1.1.1, 1.0.0.1

[Peer]
PublicKey = SERVER_PUBLIC_KEY
PresharedKey = PRESHARED_KEY
Endpoint = server.example.com:51820
AllowedIPs = 0.0.0.0/0, ::/0
PersistentKeepalive = 25

Split tunnel (only specific networks): change

AllowedIPs

to

10.10.0.0/24, 10.0.0.0/8, 192.168.0.0/16

QR code for mobile:

qrencode -t ansiutf8 < client1.conf

Step 4: Automated Peer Provisioning

#!/bin/bash
# add-peer.sh — generate keys, add to server, create client config + QR
set -e
PEER_NAME=$1; SERVER_IP="your.server.ip"; SERVER_PORT=51820
SERVER_PUBKEY=$(cat /etc/wireguard/server_public.key)
WG_SUBNET="10.10.0"

LAST_IP=$(grep -oP 'AllowedIPs = 10\.10\.0\.\K\d+' /etc/wireguard/wg0.conf | sort -n | tail -1)
NEXT_IP=$((${LAST_IP:-1} + 1))

PRIV=$(wg genkey); PUB=$(echo "$PRIV" | wg pubkey); PSK=$(wg genpsk)

# Add peer live + to config
wg set wg0 peer "$PUB" preshared-key <(echo "$PSK") allowed-ips "${WG_SUBNET}.${NEXT_IP}/32"
cat >> /etc/wireguard/wg0.conf <<EOF

# ${PEER_NAME}
[Peer]
PublicKey = ${PUB}
PresharedKey = ${PSK}
AllowedIPs = ${WG_SUBNET}.${NEXT_IP}/32
EOF

# Generate client config
mkdir -p ~/wg-clients
cat > ~/wg-clients/${PEER_NAME}.conf <<EOF
[Interface]
PrivateKey = ${PRIV}
Address = ${WG_SUBNET}.${NEXT_IP}/32
DNS = 1.1.1.1, 1.0.0.1

[Peer]
PublicKey = ${SERVER_PUBKEY}
PresharedKey = ${PSK}
Endpoint = ${SERVER_IP}:${SERVER_PORT}
AllowedIPs = 0.0.0.0/0, ::/0
PersistentKeepalive = 25
EOF

qrencode -t ansiutf8 < ~/wg-clients/${PEER_NAME}.conf
echo "Peer added: ${PEER_NAME} (${WG_SUBNET}.${NEXT_IP})"

Remove a peer:

wg set wg0 peer "$PEER_PUB" remove

and edit

wg0.conf

to remove the block.

Step 5: Site-to-Site VPN

Office A (LAN: 192.168.1.0/24):

[Interface]
Address = 10.10.0.1/24
ListenPort = 51820
PrivateKey = OFFICE_A_PRIVATE
PostUp = iptables -A FORWARD -i wg0 -j ACCEPT; iptables -A FORWARD -o wg0 -j ACCEPT
PostDown = iptables -D FORWARD -i wg0 -j ACCEPT; iptables -D FORWARD -o wg0 -j ACCEPT

[Peer]
PublicKey = OFFICE_B_PUBLIC
Endpoint = office-b.example.com:51820
AllowedIPs = 10.10.0.2/32, 192.168.2.0/24
PersistentKeepalive = 25

Office B mirrors this with its own private key, Office A's public key, and

AllowedIPs = 10.10.0.1/32, 192.168.1.0/24

. Both need IP forwarding enabled.

Step 6: DNS Integration & Monitoring

Pi-hole on WireGuard server:

curl -sSL https://install.pi-hole.net | bash
pihole -a -i wg0
# Set client DNS to 10.10.0.1

Monitoring:

wg show          # Active peers, endpoints, transfer stats, last handshake
wg show wg0 dump # Machine-readable output for scripting

Performance tuning:

sysctl -w net.core.rmem_max=2500000
sysctl -w net.core.wmem_max=2500000
# In [Interface]: MTU = 1380 (for networks with extra encapsulation)

Examples

Example 1: Deploy a WireGuard server and provision 5 team members

User prompt: "Set up WireGuard on our Ubuntu 22.04 server at 203.0.113.10. Create peers for alice, bob, carol, dave, and eve with full tunnel configs and generate QR codes for mobile setup."

The agent will install wireguard and qrencode, generate server keys, create

/etc/wireguard/wg0.conf

with the server interface on 10.10.0.1/24 and NAT masquerading, enable IP forwarding, write an

add-peer.sh

script, run it for each of the five team members to generate key pairs, append peer blocks to the server config, create individual

.conf

files with full tunnel routing (AllowedIPs 0.0.0.0/0), display QR codes for each, and start the wg-quick service.

Example 2: Connect two office networks over a site-to-site WireGuard tunnel

User prompt: "Office A is at 198.51.100.5 with LAN 192.168.1.0/24 and Office B is at 203.0.113.20 with LAN 192.168.2.0/24. Set up a WireGuard site-to-site tunnel so both LANs can reach each other."

The agent will generate key pairs on both servers, create

wg0.conf

on Office A with a peer block for Office B listing

AllowedIPs = 10.10.0.2/32, 192.168.2.0/24

, create the mirror config on Office B with

AllowedIPs = 10.10.0.1/32, 192.168.1.0/24

, enable IP forwarding and iptables FORWARD rules on both machines, open UDP port 51820 in the firewall, and start

wg-quick@wg0

on each side.

Guidelines

• Always use

  umask 077

  before generating keys so private keys are readable only by root
• Enable preshared keys (

  wg genpsk

  ) on all peers for defense-in-depth against future quantum computing attacks
• WireGuard has no built-in user authentication; access is controlled entirely by key pairs, so treat private keys like passwords and revoke peers by removing their public key from the server
• Set

  PersistentKeepalive = 25

  for peers behind NAT to keep the UDP session alive; omit it for server-to-server links where both sides have public IPs
• The

  AllowedIPs

  field serves as both a routing table and an ACL; it controls which IPs a peer can send traffic from and which destination IPs get routed to that peer
• Back up

  /etc/wireguard/wg0.conf

  before adding peers since

  wg-quick

  will refuse to start if the config has syntax errors