Openpaw c-lights

Control Philips Hue smart lights using the `openhue` CLI. Turn lights on/off, adjust brightness and color, activate scenes, and manage rooms and groups.

install

source · Clone the upstream repo

git clone https://github.com/daxaur/openpaw

Claude Code · Install into ~/.claude/skills/

T=$(mktemp -d) && git clone --depth=1 https://github.com/daxaur/openpaw "$T" && mkdir -p ~/.claude/skills && cp -r "$T/skills/c-lights" ~/.claude/skills/daxaur-openpaw-c-lights && rm -rf "$T"

manifest: skills/c-lights/SKILL.md

What This Skill Does

Enables Claude to control Philips Hue smart lighting — individual bulbs, rooms, and scenes — using the

openhue

CLI.

Available CLI Tool:

openhue

Common Commands

# List all lights
openhue get lights

# List all rooms/groups
openhue get rooms

# Turn a light on or off
openhue set light "Desk Lamp" --on
openhue set light "Desk Lamp" --off

# Set brightness (0-100)
openhue set light "Bedroom" --brightness 75

# Set color by name or hex
openhue set light "Living Room" --color red
openhue set light "Living Room" --color "#FF6600"

# Set color temperature (warm to cool, in mirek)
openhue set light "Kitchen" --color-temp 370

# Control an entire room
openhue set room "Living Room" --on --brightness 80

# List available scenes
openhue get scenes

# Activate a scene
openhue set scene "Relax" --room "Living Room"

Usage Guidelines

Use room-level commands when the user refers to a space, not a specific bulb
Brightness is 0–100; color-temp ranges roughly 153 (cool) to 500 (warm)
List lights/rooms first if unsure of exact names

Notes

Requires
```
openhue
```
configured with your Hue Bridge IP and API key
Bridge must be on the same local network