Remediate Failures

Purpose / When to Activate

Activate when:

• QA review returns FAIL
• Acceptance criteria are unmet
• Rules are violated
• Regressions are detected
• Implementation deviates from governed artefacts

---

Process

1. Identify all failures precisely from the QA report
2. Map each failure to: acceptance criteria / rule violated / implementation section
3. Determine minimal corrective changes
4. Apply fixes without expanding scope
5. Re-validate against Story criteria and rules
6. Prepare updated inputs for QA re-run

Loop: Detect → Correct → Re-validate → repeat until PASS.

Convergence / Escalation: If re-validation does not pass after 3 attempts, or if a fix requires changing acceptance criteria or product intent, STOP. Mark the story as

failed

and escalate to Discovery with a remediation report listing: what was attempted, what failed, and why convergence was not possible.

---

Remediation Principles

• Fix the cause, not the symptom
• Minimal change preferred
• Never broaden scope
• Never reinterpret requirements
• Respect architecture constraints
• Preserve maintainability

---

Output

• Corrected implementation
• Remediation notes:
  • What failed
  • What was fixed
  • Why it now passes
• Updated inputs for QA re-validation

---

Quality Checks

• All acceptance criteria satisfied
• No rule violations remain
• QA review will pass
• Scope unchanged
• Code remains clean

---

Non-Goals

This skill must NOT:

• Add new features
• Reinterpret product intent
• Weaken rules
• Bypass quality gates
• Silently ignore failures

If a fix requires changing product intent or scope: STOP. Escalate back to Discovery. Remediation is correction — not redesign.