Add New Sensor to Enviro+ Logger

This skill guides you through the complete process of adding a new sensor to the project.

Prerequisites

Before adding a sensor:

• Sensor library must be installed in the virtual environment
• Sensor must be hardware-compatible with Raspberry Pi
• Consider Pi Zero 2W's limited resources

Step-by-Step Process

1. Import Sensor Library

Add the sensor library import at the top of

publish_to_adafruit.py

from your_sensor_library import SensorClass

2. Initialize Sensor

Add initialization in the

read_sensors()

function

def read_sensors():
    sensors = {}

    try:
        # ... existing code ...

        # Initialize new sensor
        new_sensor = SensorClass()

        # ... rest of function ...

3. Read Sensor Value

Get the sensor value and add to

sensors

dict with a clear key name

Important: If the sensor uses analog/ADC readings, it may return stale data on first read (like BME280 and MICS6814). Test this and discard first reading if needed:

# If sensor needs first reading discard:
_ = new_sensor.read()
time.sleep(0.1)

# Get actual reading
value = new_sensor.read()
sensors['new_sensor_name'] = round(value, 2)

4. Publish to Adafruit IO

Add feed mapping in

publish_to_adafruit()

function's

feed_mapping

dict:

feed_mapping = {
    'temperature': 'enviro-temperature',
    'pressure': 'enviro-pressure',
    # ... existing feeds ...
    'new_sensor_name': 'enviro-new-sensor',  # Add this
}

5. Publish to Home Assistant

Add sensor configuration in

publish_to_homeassistant()

function's

sensor_configs

dict:

sensor_configs = {
    'temperature': {
        'name': 'Enviro+ Temperature',
        'unit': '°C',
        'device_class': 'temperature',
        'icon': 'mdi:thermometer'
    },
    # ... existing sensors ...
    'new_sensor_name': {
        'name': 'Enviro+ New Sensor',
        'unit': 'UNIT',  # e.g., 'Pa', '%', 'lx'
        'device_class': 'CLASS',  # e.g., 'pressure', 'humidity', 'illuminance'
        'icon': 'mdi:ICON_NAME'
    }
}

Home Assistant device_class reference:

• Temperature:

  device_class: 'temperature'

  , unit:

  '°C'

• Pressure:

  device_class: 'atmospheric_pressure'

  , unit:

  'hPa'

• Humidity:

  device_class: 'humidity'

  , unit:

  '%'

• Light:

  device_class: 'illuminance'

  , unit:

  'lx'

  (NOT 'lux'!)
• Custom: Omit device_class, use descriptive icon

Icon reference: Browse Material Design Icons

6. Update Documentation

README.md:

• Add sensor to the feeds list
• Explain what it measures and typical values
• Update sensor description section

CLAUDE.md (or SKILLS.md if not merged):

• Add sensor details to hardware section
• Document any special considerations (calibration, warm-up, etc.)

7. Test Manually

Run at least 3 times to verify stability:

source ~/.virtualenvs/pimoroni/bin/activate
python3 /home/kleinmatic/Code/enviroplus-logger/publish_to_adafruit.py

8. Verify in Home Assistant

If Home Assistant publishing is enabled:

1. Check sensor appears in Settings → Devices & Services → MQTT → Enviro+ Sensor
2. Verify in Developer Tools → States (filter for "enviro")
3. Check unit of measurement displays correctly
4. Verify icon appears as expected

9. Rate Limit Check

Critical: Ensure total publishing time doesn't exceed Adafruit IO limits

• Free tier: 30 data points/minute maximum
• Each sensor takes 0.5 seconds to publish
• Formula:

  (number_of_sensors × 0.5 seconds) < 30 seconds

Currently: 8 sensors × 0.5s = 4 seconds ✓

With your new sensor: 9 sensors × 0.5s = 4.5 seconds ✓

If you exceed 30 seconds total, you'll get 429 rate limit errors.

10. Update Dependencies

If you installed a new library:

source ~/.virtualenvs/pimoroni/bin/activate
pip freeze > requirements.txt

Important Reminders

Don't Add Excessive Logging

• microSD card longevity concerns on Pi Zero
• Current logging is acceptable but don't expand it
• Remove temporary debug print statements before committing

Test First Reading Behavior

Many analog sensors return stale data on first read. Always test:

source ~/.virtualenvs/pimoroni/bin/activate
python3 -c "
from your_sensor import Sensor
import time

sensor = Sensor()
print('First reading:', sensor.read())
time.sleep(0.1)
print('Second reading:', sensor.read())
time.sleep(10)
print('After 10s idle:', sensor.read())
time.sleep(0.1)
print('Second after idle:', sensor.read())
"

If first readings are different, discard them like BME280 and MICS6814.

Security Check

Before committing:

• Verify

  .env

  is still in

  .gitignore

• No credentials in code
• Test with

  read_sensors.py

  first

Common Issues

Sensor not appearing in Home Assistant:

• Check Home Assistant logs: Settings → System → Logs
• Look for MQTT discovery errors
• Verify MQTT broker is running
• Check device_class/unit compatibility

Rate limit 429 errors:

• Too many sensors or publishing too frequently
• Reduce cron frequency or number of sensors

Stale readings:

• Add first reading discard pattern
• Test over 10+ minute period for gas sensors (warm-up time)

After Adding Sensor

Run the publishing script manually a few times, then monitor the cron job logs:

tail -f /home/kleinmatic/Code/enviroplus-logger/sensor_log.txt

Verify data appears correctly in both Adafruit IO and Home Assistant (if enabled).