Capture Health Check for WaveCap-SDR

This skill performs end-to-end verification of WaveCap-SDR captures, detecting stuck captures, missing audio, and spectrum issues.

When to Use This Skill

Use this skill when:

• Spectrum analyzer shows "Starting capture" indefinitely
• Audio is not playing from a channel
• Capture is stuck in "starting" or "failed" state
• After fixing SDRplay service issues to verify captures recovered
• For general system health verification

Quick Health Check

Run this to check all captures:

curl -s http://localhost:8087/api/v1/health | python3 -c "
import sys, json
data = json.load(sys.stdin)
print(f\"Overall: {data['status']}\")
print()

# Check captures
caps = data['checks'].get('captures', {})
print('Captures:')
for c in caps.get('captures', []):
    status = '✓' if c['state'] == 'running' else '✗'
    print(f\"  {status} {c['id']}: {c['state']} - {c['device_id'][:40]}...\")
print()

# Check channels
chans = data['checks'].get('channels', {})
print('Channels:')
for ch in chans.get('channels', []):
    status = '✓' if ch['state'] == 'running' else '✗'
    print(f\"  {status} {ch['id']}: {ch['state']} ({ch['mode']})\")
"

Diagnosing Stuck Captures

Check 1: Capture State

A capture stuck in "starting" for more than 5 seconds indicates a problem.

# Get detailed capture info
curl -s http://localhost:8087/api/v1/captures | python3 -c "
import sys, json
for c in json.load(sys.stdin):
    print(f\"Capture {c['id']}:\")
    print(f\"  State: {c['state']}\")
    print(f\"  Device: {c['deviceId'][:60]}...\")
    print(f\"  Antenna: {c.get('antenna') or 'NOT SET (stuck?)'}\")
    print(f\"  Error: {c.get('errorMessage') or 'None'}\")
    print()
"

Indicators of stuck capture:

• state: starting

  for >5 seconds

• antenna: null

  (device never fully initialized)
• No

  errorMessage

  but still not running

Check 2: Device Availability

Verify the SDR device is accessible outside WaveCap:

# Test SoapySDR enumeration (should complete in <5 seconds)
SoapySDRUtil --find

# If this hangs, the SDRplay service is stuck - run:
sudo /bin/launchctl kickstart -kp system/com.sdrplay.service

Check 3: Spectrum Data Flow

Test if spectrum data is being generated:

# Fetch spectrum snapshot
curl -s http://localhost:8087/api/v1/captures/c1/spectrum/snapshot | python3 -c "
import sys, json
try:
    data = json.load(sys.stdin)
    power = data.get('power', [])
    if power:
        print(f'Spectrum OK: {len(power)} bins, range {min(power):.1f} to {max(power):.1f} dB')
    else:
        print('ERROR: No spectrum data')
except:
    print('ERROR: Invalid response')
"

Check 4: Audio Flow

Test if audio is being demodulated:

# Check channel metrics (should have signal power)
curl -s http://localhost:8087/api/v1/channels | python3 -c "
import sys, json
for ch in json.load(sys.stdin):
    rssi = ch.get('rssiDb')
    audio_rms = ch.get('audioRmsDb')
    status = '✓' if rssi and audio_rms else '?'
    print(f\"{status} {ch['id']}: RSSI={rssi or 'N/A'} dB, Audio RMS={audio_rms or 'N/A'} dB\")
"

Common Issues and Fixes

Issue: Capture Stuck in "starting" (SDRplay)

Cause: SDRplay API service was stuck when capture tried to start.

Fix:

1. Restart SDRplay service:

   sudo /bin/launchctl kickstart -kp system/com.sdrplay.service
   

2. Delete and recreate the stuck capture:

   curl -X DELETE http://localhost:8087/api/v1/captures/c2
   curl -X POST http://localhost:8087/api/v1/captures \
     -H "Content-Type: application/json" \
     -d '{"deviceId": "driver=sdrplay,serial=YOUR_SERIAL", "centerHz": 90300000, "sampleRate": 1000000}'
   

3. If still stuck, restart the WaveCap server (device reference may be stale)

Issue: Capture Stuck in "starting" (After Service Fix)

Cause: Server has stale device reference from previous failed capture.

Fix: Restart the WaveCap server:

# Find and kill the server
pkill -f "python.*wavecapsdr"
# Restart (from project root)
./start-app.sh

Issue: Spectrum Shows Noise Only

Possible causes:

• Antenna not connected
• Wrong antenna port selected
• Gain too low

Check:

curl -s http://localhost:8087/api/v1/captures/c1 | python3 -c "
import sys, json
c = json.load(sys.stdin)
print(f\"Antenna: {c.get('antenna')}\")
print(f\"Gain: {c.get('gain')} dB\")
"

Issue: No Audio Despite Good Spectrum

Possible causes:

• Channel not started
• Wrong offset (channel not on signal)
• Squelch too high

Check:

curl -s http://localhost:8087/api/v1/channels | python3 -c "
import sys, json
for ch in json.load(sys.stdin):
    print(f\"{ch['id']}: state={ch['state']}, offset={ch['offsetHz']}Hz, squelch={ch.get('squelchDb')}dB, rssi={ch.get('rssiDb')}dB\")
"

Full E2E Verification Script

Save this as a script for complete system verification:

#!/bin/bash
echo "=== WaveCap-SDR E2E Health Check ==="
echo

# 1. Check server is responding
echo "1. Server status:"
if curl -s http://localhost:8087/api/v1/health > /dev/null 2>&1; then
    echo "   ✓ Server responding"
else
    echo "   ✗ Server not responding"
    exit 1
fi

# 2. Check devices
echo
echo "2. SDR Devices:"
curl -s http://localhost:8087/api/v1/devices | python3 -c "
import sys, json
devs = json.load(sys.stdin)
for d in devs:
    print(f\"   ✓ {d['driver']}: {d['label']}\")
if not devs:
    print('   ✗ No devices found')
"

# 3. Check captures
echo
echo "3. Captures:"
STUCK=$(curl -s http://localhost:8087/api/v1/captures | python3 -c "
import sys, json
stuck = 0
for c in json.load(sys.stdin):
    status = '✓' if c['state'] == 'running' else '✗'
    antenna = c.get('antenna') or 'N/A'
    print(f\"   {status} {c['id']}: {c['state']} (antenna: {antenna})\")
    if c['state'] == 'starting':
        stuck += 1
print(stuck)
" | tail -1)

if [ "$STUCK" -gt 0 ]; then
    echo
    echo "   WARNING: $STUCK capture(s) stuck in 'starting' state!"
fi

# 4. Check channels and audio
echo
echo "4. Channels (audio flow):"
curl -s http://localhost:8087/api/v1/channels | python3 -c "
import sys, json
for ch in json.load(sys.stdin):
    rssi = ch.get('rssiDb')
    audio = ch.get('audioRmsDb')
    if ch['state'] != 'running':
        status = '✗'
        note = 'not running'
    elif rssi is None:
        status = '?'
        note = 'no RSSI (capture not running?)'
    elif audio is None or audio < -80:
        status = '~'
        note = 'weak/no audio'
    else:
        status = '✓'
        note = f'RSSI={rssi:.0f}dB, audio={audio:.0f}dB'
    print(f\"   {status} {ch['id']}: {note}\")
"

echo
echo "=== Check Complete ==="

Integration with Claude Code

When Claude Code encounters capture issues:

1. First run the quick health check
2. If captures are stuck, check device availability
3. If SDRplay device times out, run the sdrplay-service-fix skill
4. After fixing SDRplay, restart stuck captures or the server if needed
5. Verify fix with the full E2E script