IC10 Hardware Setup

Generate complete hardware setup instructions including device connections, wiring diagrams, power requirements, and installation steps.

Workflow

1. Analysis Phase

Use Task tool to spawn:

• code-analyzer

  - Extract device information from code

2. Hardware Guide Generation Phase

Use Task tool to spawn:

• hardware-guide

  - Create complete setup instructions with diagrams

What You Get

A complete hardware guide including:

Device Connection Table

• IC port mappings (d0-d5)
• Device types and purposes
• Required connections (logic cables, power, pipes, etc.)

Wiring Diagrams

• ASCII art showing physical layout
• Logic cable connections
• Power network topology
• Atmosphere/hydraulic routing (if applicable)

Power Requirements

• Total power calculation
• Peak vs average consumption
• Recommended power source (battery/generator/APC)

Installation Steps

• Device placement recommendations
• Connection procedures
• Testing checklist
• Troubleshooting tips

Safety Notes

• Pressure system warnings
• Power handling precautions
• Rocket launch safety

Instructions

When user asks for hardware setup:

1. Review the IC10 code

   • Identify all devices used (d0-d5, db)
   • Check for device comments
   • Note any special requirements

2. Launch code-analyzer to extract device info

3. Launch hardware-guide to create setup instructions

4. Present the complete guide including:

   • Visual diagrams
   • Connection table
   • Power requirements
   • Installation steps

Example Triggers

• "How do I wire this up?"
• "What devices do I need?"
• "Show me the setup"
• "Installation instructions"
• "Hardware guide for this code"
• "Physical connections"
• "How do I connect..."

Output Format

After setup guide is generated, present:

## Hardware Setup: [Script Name]

### Quick Summary

**Devices Needed**: X devices (list)
**Total Power**: XW (peak)
**Difficulty**: Beginner/Intermediate/Advanced

---

### Device Connections

| IC Port | Device | Connections Required |
|-----------|--------|-------------------|
| d0 | Gas Sensor | Logic cable + Power |
| d1 | Active Vent | Logic cable + Power + Atmos pipe |
...

### Wiring Diagram

[ASCII diagram showing physical setup]

### Power Analysis

| Device | Power Draw | Notes |
|---------|------------|--------|
| IC Housing | 10W | Always on |
| Gas Sensor | 5W | ... |
... | ... | ... |
| **Total** | **XXW** | Peak: XXW, Avg: XXW |

**Power Source**: Battery ≥ XXXW or Generator

### Installation Steps

#### Step 1: Device Placement
[ ] Place IC Housing...
[ ] Place Gas Sensor...
...

#### Step 2: Logic Connections
[ ] Connect Gas Sensor to IC d0...
...

#### Step 3: Power Connections
[ ] Power IC Housing...
...

#### Step 4: Test
[ ] Load script...
[ ] Test operation...

Notes

• Setup guide is based on code analysis
• In-game testing recommended to verify all connections work
• Power calculations are estimates (actual may vary)
• Some scripts may require additional devices not in code (e.g., APC for power distribution)