Learn-skills.dev opentrade-dex-swap

This skill should be used when the user asks to 'swap tokens', 'trade OKB for USDC', 'buy tokens', 'sell tokens', 'exchange crypto', 'convert tokens', 'swap SOL for USDC', 'get a swap quote', 'execute a trade', 'find the best swap route', 'cheapest way to swap', 'optimal swap', 'compare swap rates', or mentions swapping, trading, buying, selling, or exchanging tokens on XLayer, Solana, Ethereum, Base, BSC, Arbitrum, Polygon, or any of 20+ supported chains. Aggregates liquidity from 500+ DEX sources for optimal routing and price. Supports slippage control, price impact protection, and cross-DEX route optimization. Do NOT use for general programming questions about swap code, or for analytical questions about historical swap volume.

install

source · Clone the upstream repo

git clone https://github.com/NeverSight/learn-skills.dev

Claude Code · Install into ~/.claude/skills/

T=$(mktemp -d) && git clone --depth=1 https://github.com/NeverSight/learn-skills.dev "$T" && mkdir -p ~/.claude/skills && cp -r "$T/data/skills-md/6551team/opentrade/opentrade-dex-swap" ~/.claude/skills/neversight-learn-skills-dev-opentrade-dex-swap && rm -rf "$T"

manifest: data/skills-md/6551team/opentrade/opentrade-dex-swap/SKILL.md

source content

OpenTrade DEX Aggregator CLI

5 commands for multi-chain swap aggregation — quote, approve, and execute.

Pre-flight Checks

Every time before running any

opentrade

command, always follow these steps in order. Do not echo routine command output to the user; only provide a brief status update when installing, updating, or handling a failure.

Confirm installed: Run

which opentrade

. If not found, install it:

curl -sSL https://raw.githubusercontent.com/6551Team/openskills/main/skills/opentrade/install.sh | sh

If the install script fails, ask the user to install manually following the instructions at: https://github.com/6551Team/openskills

Check for updates: Read

~/.opentrade/last_check

and compare it with the current timestamp:

cached_ts=$(cat ~/.opentrade/last_check 2>/dev/null || true)
now=$(date +%s)

If
```
cached_ts
```
is non-empty and
```
(now - cached_ts) < 43200
```
(12 hours), skip the update and proceed.

Otherwise (file missing or older than 12 hours), run the installer to check for updates:

curl -sSL https://raw.githubusercontent.com/6551Team/openskills/main/skills/opentrade/install.sh | sh

If a newer version is installed, tell the user and suggest updating their opentrade skills from https://github.com/6551Team/openskills to get the latest features.

If any

opentrade

command fails with an unexpected error during this session, try reinstalling before giving up:

curl -sSL https://raw.githubusercontent.com/6551Team/openskills/main/skills/opentrade/install.sh | sh

Find or create a .env file in the project root to override the default API credentials, Load it before performing opentrade operations.

OPEN_TOKEN=your_token_here

Get your API token at: https://6551.io/mcp

Security warning: Never commit .env to git (add it to .gitignore) and never expose credentials in logs, screenshots, or chat messages.

Router Discovery

IMPORTANT: If the user has not specified a trading router, you MUST first discover available routers:

opentrade trade routers

Response format:

{
  "ok": true,
  "data": [
    {
      "api": "v2",
      "created_at": "2026-03-10 01:15:42",
      "is_active": true,
      "name": "6551dex test",
      "quota_reward": 0,
      "trader": "6551dex",
      "updated_at": "2026-03-10 01:15:42"
    },
    {
      "api": "v1",
      "created_at": "2026-03-03 21:24:34",
      "is_active": true,
      "name": "okx test",
      "quota_reward": 0,
      "trader": "okx",
      "updated_at": "2026-03-03 21:24:34"
    }
  ]
}

Usage:

Extract
```
trader
```
and
```
api
```
from the response
MANDATORY: ALL subsequent
```
opentrade
```
commands in this session MUST include
```
--trader <trader>
```
and
```
--api <api>
```
flags

Example:

opentrade swap quote --from 0x... --to 0x... --amount 100 --chain ethereum --trader okx --api v1

Default fallback: If the API returns no data or is empty, use
```
--trader okx --api v1
```

Skill Routing

For token search → use
```
opentrade-token
```
For market prices → use
```
opentrade-market
```
For transaction broadcasting → use
```
opentrade-gateway
```
For wallet balances / portfolio → use
```
opentrade-portfolio
```

Quickstart

EVM Swap (quote → approve → swap)

# 1. Quote — sell 100 USDC for OKB on XLayer
opentrade swap quote \
  --from 0x74b7f16337b8972027f6196a17a631ac6de26d22 \
  --to 0xeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee \
  --amount 100000000 \
  --chain xlayer
# → Expected: X.XX OKB, gas fee, price impact

# 2. Approve — ERC-20 tokens need approval before swap (skip for native OKB)
opentrade swap approve \
  --token 0x74b7f16337b8972027f6196a17a631ac6de26d22 \
  --amount 100000000 \
  --chain xlayer
# → Returns approval calldata: sign and broadcast via opentrade-gateway

# 3. Swap
opentrade swap swap \
  --from 0x74b7f16337b8972027f6196a17a631ac6de26d22 \
  --to 0xeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee \
  --amount 100000000 \
  --chain xlayer \
  --wallet 0xYourWallet \
  --slippage 1
# → Returns tx data: sign and broadcast via opentrade-gateway

Solana Swap

opentrade swap swap \
  --from 11111111111111111111111111111111 \
  --to DezXAZ8z7PnrnRJjz3wXBoRgixCa6xjnB7YaB1pPB263 \
  --amount 1000000000 \
  --chain solana \
  --wallet YourSolanaWallet \
  --slippage 1
# → Returns tx data: sign and broadcast via opentrade-gateway

Chain Name Support

The CLI accepts human-readable chain names and resolves them automatically.

Chain	Name	chainIndex
XLayer	`xlayer`	`196`
Solana	`solana`	`501`
Ethereum	`ethereum`	`1`
Base	`base`	`8453`
BSC	`bsc`	`56`
Arbitrum	`arbitrum`	`42161`

Native Token Addresses

CRITICAL: Each chain has a specific native token address. Using the wrong address will cause swap transactions to fail.

Chain	Native Token Address
EVM (Ethereum, BSC, Polygon, Arbitrum, Base, etc.)	`0xeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee`
Solana	`11111111111111111111111111111111`
Sui	`0x2::sui::SUI`
Tron	`T9yD14Nj9j7xAB4dbGeiX9h8unkKHxuWwb`
Ton	`EQAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAM9c`

WARNING — Solana native SOL: The correct address is
11111111111111111111111111111111
(Solana system program). Do NOT use
So11111111111111111111111111111111111111112
(wSOL SPL token) — it is a different token and will cause swap failures.

Command Index


opentrade swap chains
opentrade swap liquidity --chain <chain>
opentrade swap approve --token ... --amount ... --chain ...
opentrade swap quote --from ... --to ... --amount ... --chain ...
opentrade swap swap --from ... --to ... --amount ... --chain ... --wallet ...

Cross-Skill Workflows

This skill is the execution endpoint of most user trading flows. It almost always needs input from other skills first.

Workflow A: Full Swap by Token Name (most common)

User: "Swap 1 SOL for BONK on Solana"

1. opentrade-token    opentrade token search BONK --chains solana               → get BONK tokenContractAddress
       ↓ tokenContractAddress
2. opentrade-dex-swap opentrade swap quote \
                      --from 11111111111111111111111111111111 \
                      --to <BONK_address> --amount 1000000000 --chain solana → get quote
       ↓ user confirms
3. opentrade-dex-swap opentrade swap swap \
                      --from 11111111111111111111111111111111 \
                      --to <BONK_address> --amount 1000000000 --chain solana \
                      --wallet <addr>                                        → get swap calldata
4. User signs the transaction
5. opentrade-gateway  opentrade gateway broadcast --signed-tx <tx> --address <addr> --chain solana

Data handoff:

```
tokenContractAddress
```
from step 1 →
```
--to
```
in steps 2-3
SOL native address =
```
11111111111111111111111111111111
```
→
```
--from
```
. Do NOT use wSOL address.
Amount
```
1 SOL
```
=
```
1000000000
```
(9 decimals) →
```
--amount
```
param

Workflow B: EVM Swap with Approval

User: "Swap 100 USDC for OKB on XLayer"

1. opentrade-token    opentrade token search USDC --chains xlayer               → get USDC address
2. opentrade-dex-swap opentrade swap quote --from <USDC> --to 0xeeee...eeee --amount 100000000 --chain xlayer
       ↓ check isHoneyPot, taxRate, priceImpactPercent
3. opentrade-dex-swap opentrade swap approve --token <USDC> --amount 100000000 --chain xlayer
4. User signs the approval transaction
5. opentrade-gateway  opentrade gateway broadcast --signed-tx <tx> --address <addr> --chain xlayer
6. opentrade-dex-swap opentrade swap swap --from <USDC> --to 0xeeee...eeee --amount 100000000 --chain xlayer --wallet <addr>
7. User signs the swap transaction
8. opentrade-gateway  opentrade gateway broadcast --signed-tx <tx> --address <addr> --chain xlayer

Key: EVM tokens (not native OKB) require an approve step. Skip it if user is selling native tokens.

Workflow C: Compare Quote Then Execute

1. opentrade swap quote --from ... --to ... --amount ... --chain ...  → get quote with route info
2. Display to user: expected output, gas, price impact, route
3. If price impact > 5% → warn user
4. If isHoneyPot = true → block trade, warn user
5. User confirms → proceed to approve (if EVM) → swap

Swap Flow

EVM Chains (XLayer, Ethereum, BSC, Base, etc.)

1. opentrade swap quote ...              → Get price and route
2. opentrade swap approve ...            → Get approval calldata (if needed)
3. User signs the approval transaction
4. opentrade gateway broadcast ...       → Broadcast approval tx
5. opentrade swap swap ...               → Get swap calldata
6. User signs the swap transaction
7. opentrade gateway broadcast ...       → Broadcast swap tx

Solana

1. opentrade swap quote ...              → Get price and route
2. opentrade swap swap ...               → Get swap calldata
3. User signs the transaction
4. opentrade gateway broadcast ...       → Broadcast tx

Operation Flow

Step 1: Identify Intent

View a quote →
```
opentrade swap quote
```
Execute a swap → full swap flow (quote → approve → swap)
List available DEXes →
```
opentrade swap liquidity
```
Approve a token →
```
opentrade swap approve
```

Step 2: Collect Parameters

Missing chain → recommend XLayer (
```
--chain xlayer
```
, low gas, fast confirmation) as the default, then ask which chain the user prefers
Missing token addresses → use
```
opentrade-token
```
```
opentrade token search
```
to resolve name → address
Missing amount → ask user, remind to convert to minimal units
Missing slippage → suggest 1% default, 3-5% for volatile tokens
Missing wallet address → ask user

Step 3: Execute

Quote phase: call
```
opentrade swap quote
```
, display estimated results
- Expected output, gas estimate, price impact, routing path
- Check
```
isHoneyPot
```
  and
```
taxRate
```
  — surface safety info to users
Confirmation phase: wait for user approval before proceeding
Approval phase (EVM only): check/execute approve if selling non-native token
Execution phase: call
```
opentrade swap swap
```
, return tx data for signing

Step 4: Suggest Next Steps

After displaying results, suggest 2-3 relevant follow-up actions:

Just completed	Suggest
`swap quote` (not yet confirmed)	1. View price chart before deciding → `opentrade-market` 2. Proceed with swap → continue approve + swap (this skill)
Swap executed successfully	1. Check price of the token just received → `opentrade-market` 2. Swap another token → new swap flow (this skill)
`swap liquidity`	1. Get a swap quote → `opentrade swap quote` (this skill)

Present conversationally, e.g.: "Swap complete! Would you like to check your updated balance?" — never expose skill names or endpoint paths to the user.

CLI Command Reference

1. opentrade swap chains

Get supported chains for DEX aggregator. No parameters required.

opentrade swap chains

Return fields:

Field Type Description

chainIndex

String

Chain identifier (e.g.,

"1"

"501"

)

chainName

String

Human-readable chain name

dexTokenApproveAddress

String

DEX router address for token approvals on this chain

2. opentrade swap liquidity

Get available liquidity sources on a chain.

opentrade swap liquidity --chain <chain>

Param Required Default Description

--chain

Yes

Chain name (e.g.,

ethereum

solana

xlayer

)

Return fields:

Field Type Description

id

String

Liquidity source ID

name

String

Liquidity source name (e.g.,

"Uniswap V3"

"CurveNG"

)

logo

String

Liquidity source logo URL

3. opentrade swap approve

Get ERC-20 approval transaction data.

opentrade swap approve --token <address> --amount <amount> --chain <chain>

Param	Required	Default	Description
`--token`	Yes	-	Token contract address to approve
`--amount`	Yes	-	Amount in minimal units
`--chain`	Yes	-	Chain name

Return fields:

Field	Type	Description
`data`	String	Approval calldata (hex) — use as tx `data` field
`dexContractAddress`	String	Spender address (already encoded in `data` ). NOT the tx `to` — send tx to the token contract
`gasLimit`	String	Estimated gas limit for the approval tx
`gasPrice`	String	Recommended gas price

4. opentrade swap quote

Get swap quote (read-only price estimate).

opentrade swap quote --from <address> --to <address> --amount <amount> --chain <chain> [--swap-mode <mode>]

Param	Required	Default	Description
`--from`	Yes	-	Source token contract address
`--to`	Yes	-	Destination token contract address
`--amount`	Yes	-	Amount in minimal units (sell amount if exactIn, buy amount if exactOut)
`--chain`	Yes	-	Chain name
`--swap-mode`	No	`exactIn`	`exactIn` or `exactOut`

Return fields:

Field	Type	Description
`toTokenAmount`	String	Expected output amount in minimal units
`fromTokenAmount`	String	Input amount in minimal units
`estimateGasFee`	String	Estimated gas fee (native token units)
`tradeFee`	String	Trade fee estimate in USD
`priceImpactPercent`	String	Price impact as percentage (e.g., `"0.05"` )
`router`	String	Router type used
`dexRouterList[]`	Array	DEX routing path details
`dexRouterList[].dexName`	String	DEX name in the route
`dexRouterList[].percentage`	String	Percentage of amount routed through this DEX
`fromToken.isHoneyPot`	Boolean	`true` = source token is a honeypot (cannot sell)
`fromToken.taxRate`	String	Source token buy/sell tax rate
`fromToken.decimal`	String	Source token decimals
`fromToken.tokenUnitPrice`	String	Source token unit price in USD
`toToken.isHoneyPot`	Boolean	`true` = destination token is a honeypot (cannot sell)
`toToken.taxRate`	String	Destination token buy/sell tax rate
`toToken.decimal`	String	Destination token decimals
`toToken.tokenUnitPrice`	String	Destination token unit price in USD

5. opentrade swap swap

Get swap transaction data (quote → sign → broadcast).

opentrade swap swap --from <address> --to <address> --amount <amount> --chain <chain> --wallet <address> [--slippage <pct>] [--swap-mode <mode>]

Param	Required	Default	Description
`--from`	Yes	-	Source token contract address
`--to`	Yes	-	Destination token contract address
`--amount`	Yes	-	Amount in minimal units
`--chain`	Yes	-	Chain name
`--wallet`	Yes	-	User's wallet address
`--slippage`	No	`"1"`	Slippage tolerance in percent (e.g., `"1"` for 1%)
`--swap-mode`	No	`"exactIn"`	`exactIn` or `exactOut`

Return fields:

Field	Type	Description
`routerResult`	Object	Same structure as quote return (see swap quote above)
`tx.from`	String	Sender address
`tx.to`	String	Contract address to send the transaction to
`tx.data`	String	Transaction calldata (hex for EVM, base58 for Solana)
`tx.gas`	String	Gas limit for the transaction
`tx.gasPrice`	String	Gas price
`tx.value`	String	Native token value to send (in minimal units)
`tx.minReceiveAmount`	String	Minimum receive amount after slippage (minimal units)
`tx.maxSpendAmount`	String	Maximum spend amount (for exactOut mode)
`tx.slippagePercent`	String	Applied slippage tolerance percentage

Input / Output Examples

User says: "Swap 100 USDC for OKB on XLayer"

# 1. Quote
opentrade swap quote --from 0x74b7f16337b8972027f6196a17a631ac6de26d22 --to 0xeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee --amount 100000000 --chain xlayer
# → Expected output: 3.2 OKB, Gas fee: ~$0.001, Price impact: 0.05%

# 2. Approve (ERC-20 token needs approval)
opentrade swap approve --token 0x74b7f16337b8972027f6196a17a631ac6de26d22 --amount 100000000 --chain xlayer
# → Returns approval calldata → user signs → broadcast

# 3. Swap
opentrade swap swap --from 0x74b7f16337b8972027f6196a17a631ac6de26d22 --to 0xeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee --amount 100000000 --chain xlayer --wallet 0xYourWallet --slippage 1
# → Returns tx data → user signs → broadcast

User says: "What DEXes are available on XLayer?"

opentrade swap liquidity --chain xlayer
# → Display: CurveNG, XLayer DEX, ... (DEX sources on XLayer)

Edge Cases

High slippage (>5%): warn user, suggest splitting the trade or adjusting slippage
Large price impact (>10%): strongly warn, suggest reducing amount
Honeypot token:
```
isHoneyPot = true
```
— block trade and warn user
Tax token:
```
taxRate
```
non-zero — display to user (e.g. 5% buy tax)
Insufficient balance: check balance first, show current balance, suggest adjusting amount
exactOut not supported: only Ethereum/Base/BSC/Arbitrum — prompt user to use
```
exactIn
```

Solana native SOL address: Must use

11111111111111111111111111111111

(system program), NOT

So11111111111111111111111111111111111111112

(wSOL)

Network error: retry once, then prompt user to try again later
Region restriction (error code 50125 or 80001): do NOT show the raw error code to the user. Instead, display a friendly message:
```
⚠️ Service is not available in your region. Please switch to a supported region and try again.
```

Amount Display Rules

Input/output amounts in UI units (
```
1.5 ETH
```
,
```
3,200 USDC
```
)
Internal CLI params use minimal units (
```
1 USDC
```
=
```
"1000000"
```
,
```
1 ETH
```
=
```
"1000000000000000000"
```
)
Gas fees in USD
```
minReceiveAmount
```
in both UI units and USD
Price impact as percentage

Global Notes

Amounts must be in minimal units (wei/lamports)
```
exactOut
```
only on Ethereum(
```
1
```
)/Base(
```
8453
```
)/BSC(
```
56
```
)/Arbitrum(
```
42161
```
)
Check
```
isHoneyPot
```
and
```
taxRate
```
— surface safety info to users
EVM contract addresses must be all lowercase
The CLI resolves chain names automatically (e.g.,
```
ethereum
```
→
```
1
```
,
```
solana
```
→
```
501
```
)
The CLI handles authentication internally via environment variables — see Prerequisites step 4 for default values

#	Command	Description
1	`opentrade swap chains`	Get supported chains for DEX aggregator
2	`opentrade swap liquidity --chain <chain>`	Get available liquidity sources on a chain
3	`opentrade swap approve --token ... --amount ... --chain ...`	Get ERC-20 approval transaction data
4	`opentrade swap quote --from ... --to ... --amount ... --chain ...`	Get swap quote (read-only price estimate)
5	`opentrade swap swap --from ... --to ... --amount ... --chain ... --wallet ...`	Get swap transaction data