hping3

Overview

hping3 is a command-line TCP/IP packet crafter. Unlike

ping

(ICMP only), hping3 can send TCP, UDP, and raw IP packets with any flag combination, arbitrary payloads, spoofed sources, and fragmentation — useful for firewall auditing, ACL testing, reachability probes where ICMP is filtered, and low-level network experiments on your own infrastructure. It is interactive and scriptable.

Instructions

Step 1: Basic TCP/UDP/ICMP Probes

# TCP SYN ping to port 443 — works even when ICMP is dropped
sudo hping3 -S -p 443 -c 3 example.com
# -S: SYN flag
# -p: destination port
# -c: packet count

# TCP ACK ping — often passes stateful firewalls that drop SYN
sudo hping3 -A -p 80 -c 3 target.local

# UDP probe
sudo hping3 --udp -p 53 -c 3 ns.example.com

# Traceroute using TCP SYNs (ICMP-agnostic)
sudo hping3 --traceroute -V -S -p 443 example.com

Step 2: Port Scan a Host that Blocks ICMP

# Sweep a port range with SYN packets
sudo hping3 -S -p ++80 -c 50 target.local
# ++80: increment destination port starting at 80
# Watch replies: SA=open, RA=closed, nothing=filtered

# Target a specific list of ports via a shell loop
for p in 22 80 443 3306 5432 6379; do
  sudo hping3 -S -p $p -c 1 target.local 2>&1 | grep -E 'flags|unreach'
done

Step 3: Test Firewall and ACL Rules

# Confirm the firewall drops packets with a specific source port
sudo hping3 -S -s 53 -p 80 --keep -c 3 target.local
# -s 53     spoof source port 53
# --keep    don't randomize the source port between packets

# Confirm fragmented packets are allowed / blocked
sudo hping3 -S -p 80 -f -c 3 target.local
# -f: fragment the packet

# Verify whether the firewall lets through packets with the evil bit / reserved flags
sudo hping3 -S -p 80 --tcp-timestamp -c 3 target.local

Step 4: Measure RTT Precisely to a TCP Port

# Per-packet RTT for a specific service (better than ping for SLA checks)
sudo hping3 -S -p 443 -c 20 -i u200000 api.example.com
# -i u200000: one packet every 200ms

# Summary at the end:
# --- api.example.com hping statistic ---
# 20 packets transmitted, 20 packets received, 0% packet loss
# round-trip min/avg/max = 12.3/14.1/18.7 ms

Step 5: Scripted Use and Custom Payloads

# Send a custom payload from a file
sudo hping3 -S -p 80 -d 200 -E payload.bin target.local
# -d 200     data size 200 bytes
# -E file    read payload from file

# Listen mode — capture packets with a signature
sudo hping3 --listen 'HTTP' -I eth0

# Tcl scripting (hping3 embeds a Tcl interpreter)
sudo hping3 exec myscript.htcl

Examples

Example 1: Validate a New Firewall Rule

# The ops team just allowed TCP/5432 from the app tier to db.example.internal.
# Verify the rule without installing a real Postgres client on the test host.

# From an in-scope app host
sudo hping3 -S -p 5432 -c 5 db.example.internal
# Expected: SA flags (SYN+ACK) → port reachable and listening
# If RA (RST+ACK) → reachable but no listener
# If nothing → firewall is still dropping

# Negative control: prove TCP/6379 is still blocked
sudo hping3 -S -p 6379 -c 5 db.example.internal
# Expected: no response (100% loss) — rule is tight

Example 2: Troubleshoot Asymmetric Latency

# App team reports "intermittent 500ms latency to api.example.com"
# ping shows steady 30ms but that's ICMP. Measure the real TCP path:

sudo hping3 -S -p 443 -c 200 -i u100000 api.example.com \
  | tee /tmp/hping-api.log

# Look for outliers
awk '/rtt/ {print $NF}' /tmp/hping-api.log | sort -n | tail -20
# 31.2 ms
# 32.0 ms
# 498.6 ms   <-- confirmed outlier
# 502.1 ms

# Traceroute via TCP to locate the slow hop
sudo hping3 --traceroute -V -S -p 443 api.example.com

Guidelines

• Only test networks and hosts you are authorized to touch. Crafted packets trip IDS/IPS and can be read as an attack.

• hping3

  needs raw socket privileges — it's

  sudo

  or

  CAP_NET_RAW

  .
• Response interpretation:

  SA

  =SYN+ACK (open),

  RA

  =RST+ACK (closed), no reply=filtered. Learn these three by heart.
• Do not use source spoofing (

  -a

  /

  --spoof

  ) across the public internet. Upstream filters drop it and it's illegal on networks you don't own.
• Flood mode (

  --flood

  ) and high rates (

  -i u1

  ) are denial-of-service tools. Do not use them on shared infrastructure — ever. They are here for lab/stress testing on your own gear only.
• For TCP RTT to a specific service, hping3 is more reliable than

  ping

  because it hits the actual listener.
• Modern replacements worth knowing:

  nping

  (Nmap's packet crafter — actively maintained) and

  scapy

  (programmable in Python). Reach for them when

  hping3

  falls short.
• Always pair packet crafting with a packet capture (

  tshark

  ,

  tcpdump

  ) on at least one end — it's how you confirm what actually hit the wire.